BRZ _ U. book 182 ページ 2024 年 6 月 14 日 金曜日 午前 9 時 14 分
182
Light Control Switch- When a rapid change of brightness continues while driving.- When driving on a road with many ups and downs or uneven surfaces.- When driving on a road with many curves.- When there are some objects that reflect light strongly, such as a road sign or a mirror in vehicle ahead.- When the rear part of the vehicle ahead, such as a container, reflects light strongly.- When the headlights of your vehicle are damaged or dirty.- When your vehicle is tilted, such as in case the vehicle has a flat tire or is being towed.- When the stereo camera is deformed or the stereo camera lenses are dirty.- Immediately after the engine has started. � In the following conditions, the headlight mode will not be automatically changed from the high beam to the low beam.
- When your vehicle passes an oncoming vehicle suddenly in a blind curve.- When another vehicle passes in front of your vehicle.- When an oncoming vehicle or vehicle ahead comes in and out of view because of continuous curves, median strips, roadside trees, etc. � If the stereo camera detects the light of the front fog lights of an oncoming vehicle, the headlight mode may change from the high beam to the low beam automatically.
� The headlight mode may change from the high beam to the low beam, or the low beam mode may continue, when affected by a street light, traffic signal, illumination of an advertisement board, or a reflective object such as a road sign and signboard.
� The timing of the change of headlight mode may differ due to the following factors.
- Color or brightness of the headlights of an oncoming vehicle or the tail lights of a vehicle ahead.- The headlights of the oncoming vehicle or the tail lights of the vehicle ahead are covered with mud, snow, etc.- Movement and direction of an oncoming vehicle or a vehicle ahead.- When the headlights of an oncoming vehicle or the tail lights of a vehicle ahead illuminate on only one side.- When the oncoming vehicle or vehicle ahead is a motorcycle.- Conditions of a road( slope, curve, road surface, etc.).
■ T c ti
� �
�“ A
� p