BRZ _ U . book 131 ページ 2023 年 8 月 15 日 火曜日 午前 10 時 6 分
NOTE
� When the control dial is turned fully upward , the illumination brightness becomes the maximum and the automatic dimming function does not work at all . � The brightness setting is not canceled even when the ignition switch is turned to the “ OFF ” position .
■ Auto Dimmer Cancel Function
When the ambient light is bright , the illumination brightness is set to the maximum regardless of the position of the control dial . In this case , you cannot adjust the illumination brightness by using the control dial . When the ambient light is dark , you can dim the illumination brightness as described above .
The operational / non-operational setting and sensitivity of the auto dimmer cancel function can be changed by your SUBARU dealer . Contact your SUBARU dealer for details .
3-6 . Warning and Indicator Lights Several of the warning and indicator lights illuminate momentarily and then go out when the ignition switch is initially turned to the “ ON ” position . This permits checking the operation of the bulbs .
Apply the parking brake and turn the ignition switch to the “ ON ” position . For the system check , the following lights illuminate and turn off after several seconds or after the engine has started :
: Seatbelt warning light ( The seatbelt warning light turns off only when the driver fastens the seatbelt .)
: Front passenger ’ s seatbelt warning light ( The seatbelt warning light turns off only when the front seat passenger fastens the seatbelt .)
: Rear passenger ’ s seatbelt warning light ( The seatbelt warning light turns off only when the rear seat passenger fastens the seatbelt .)
: SRS airbag system warning light
: Front passenger ’ s frontal airbag ON indicator light
: Front passenger ’ s frontal airbag OFF indicator light
/ : CHECK ENGINE warning light / Malfunction indicator light