BRZ _ U . book 177 ページ 2022 年 3 月 29 日 火曜日 午後 3 時 59 分
When the headlights are on high beam , the high beam indicator light “ ” on the combination meter also illuminates .
■ High Beam Assist Function ( If Equipped )
NOTE
� The high beam assist function utilizes the stereo camera installed at the position of the front map lights . � For details on how to handle the stereo camera , refer to the Owner ’ s Manual supplement for the EyeSight system .
The high beam assist function automatically changes the headlight from high beam to low beam ( or vice versa ).
When all of the following conditions are met , the headlight will change to high beam .
� When the vehicle speed increases to or above 20 mph ( 32 km / h ).
� There is no preceding or oncoming vehicle .
� The forward area of the vehicle is dark . � The road does not have a sharp curve .
When any of the following conditions are met , the headlight will change to low beam .
� When the vehicle speed decreases to or below 10 mph ( 16 km / h ).
� When the forward area of the vehicle is bright .
� When there is a preceding or oncoming vehicle .
� When the EyeSight system is malfunctioning or is temporarily stopped . NOTE
� Do not overestimate the capacity of the high beam assist function . The driver always has the responsibility to understand the surrounding situation , to drive safely , and to change the headlight mode manually if necessary . � The factory setting ( default setting ) for this function is set as “ operational ”. This setting can be changed to OFF ( non-operation ) at SUBARU dealers . For more details , contact a SUBARU dealer .
▼ How to use the high beam assist function
The high beam assist function will be activated when all the following conditions are met .
� The light control switch is in the “ AUTO ” position and the low beam headlights are on automatically .
� The turn signal lever is pushed forward .