Seats 37 |
|||||||||
! Front passenger ’ s seat |
S01AQ0602 |
1 Seat position forward / backward control switch To adjust the seat forward or backward , move the control switch forward or backward .
2 Seatback angle ( reclining ) control switch To adjust the angle of the seatback , move the control switch .
! Power driver ’ s seat with synchronized outside mirrors memory function ( if equipped )
S01AQ0603
WARNING
. To avoid loss of vehicle control or personal injury , never perform the following operations while
|
driving . – Adjusting the seat
– Selecting a registered seat position
. Before adjusting the seat or selecting a registered seat position , make sure that cargo or the hands and feet of rear seat passengers are clear of the adjusting mechanism .
. The memory adjustment of the seat position is finished . Be sure to confirm that the select lever is in the “ P ” position , and the parking brake is applied , when adjusting the seat position . Do not drive until the utilizing of the seat position is complete .
. When any unusual conditions or malfunctions occur during the memory adjustment of the seat position , stop the memory adjustment of the seat position by performing any of the following procedures .
– Operate any of the power seat switches .
– Press the “ SET ” button . – Press button “ 1 ” or “ 2 ”. – Operate the outside mirror
|
control switch .
Register the seat position with button “ 1 ” or “ 2 ” or each of the key fobs .
The following memory positions can be registered .
. Forward / backward position of the seat . Angle of the seatback . Angle of the seat cushion . Height of the seat . Angle of the outside mirrors
. Angle of the outside mirror angle on the passenger ’ s side when the reverse tiltdown operates .
NOTE
The seat position can also be retrieved with the Driver Monitoring System user information . To do so , perform user registration in the Driver Monitoring System settings . Refer to “ Driver Monitoring System ” FP220 .
! Registration of memory position with button “ 1 ” or “ 2 ”
S01AQ060301
1 . Adjust the seat and outside mirror positions under the following conditions . . The parking brake is applied . . The ignition switch is in the “ ON ” position .
|
Seat , seatbelt and SRS airbags |
||||
– CONTINUED – |