408
Driver Monitoring System
clean, either wipe using a soft cloth or else wipe gently using a moistened cloth that has been thoroughly wrung out.
. When the synchronized user function is turned OFF, manual repeat facial scan is not possible.
& Registering and deleting a user
S07BP05
Users can be registered in the Driver Monitoring System, and registered users can be deleted. For the user registration and delete procedures, refer to“ Driver Monitoring System” FP220.
NOTE
. When the Driver Monitoring System OFF indicator, Driver Monitoring System temporary stop indicator, or Driver Monitoring System warning is illuminated, the following items cannot be selected. – Register User – Delete User – Delete All Users
. User information can also be deleted by resetting the center information display to the factory default settings. When the settings are reset to the factory default settings, all user information is deleted. The settings cannot be reset to the factory default settings when the Driver Monitoring System is OFF.
& Registering and deleting driver position personalization
S07BP06
At the time when a user is registered, the seat position, outside mirror angle, and reverse tilt-down outside mirror angle are registered at the same time. To change the setting for the seat position, outside mirror angle, or reverse tilt-down outside mirror angle, refer to“ Driver Monitoring System” FP220.
NOTE
. Start the user registration after adjusting the seat position, outside mirror angles, and reverse tilt-down outside mirror angle. If they are adjusted during user registration, it may be disrupted. Refer to“ Power seat” FP36 or“ Outside mirrors” FP268.
. If the ignition switch is turned to the“ OFF” position before user registration is complete, the information of the adjusted seat position, outside mirror angle, and reverse tilt-down outside mirror angle will not be saved.
. When the user recognition setting is OFF, or when the Driver Monitoring System OFF indicator, Driver Monitoring System temporary stop indicator, or Driver Monitoring System warning is illuminated, the following items cannot be selected. – Update Seat and Mirror Position – Delete Driver Position
. The driver position can be registered or deleted only when a registered user is sitting in the driver’ s seat and user recognition is completed.
& Driver Monitoring System ON / OFF settings
S07BP07
NOTE
. When the Driver Monitoring System is turned OFF after user recognition was completed, the user recognition function stores the Driver Monitoring System ON / OFF state.
. Even when the Driver Monitoring System is set to OFF, the Driver Monitoring System automatically turns ON once the driver’ s door is opened and closed while the vehicle is stopped. This only occurs when the user recognition setting is ON. The system then reverts automatically to the OFF state.