250
Mirrors
! Reprogramming a Single HomeLink Button
S03AP070406
To program a previously trained button, follow these steps:
1. Press and hold the desired HomeLink button. DO NOT release the button.
2. The indicator light will begin to slowly flash orange after 20 seconds. The HomeLink button can be released at this point. Proceed with“ Programming a New HomeLink Button” step 3.
3. If you do not complete the programming of a new device to the button, it will revert to the previously stored programming.
! Garage Door Two-Way Communication
S03AP070413
HomeLink has the capability of communicating with your garage door opener. HomeLink can receive and display“ closing” or“ opening” status messages from compatible garage door opener systems. At any time, HomeLink can also recall and display the last recorded status communicated by the garage door opener to indicate your garage door being“ closed” or“ opened”.
HomeLink has the capability of receiving this communication from the garage door opener at a range up to 820 feet( 250 m).
Range may be reduced by obstacles such as houses or trees. You may have to slow your vehicle speed to successfully receive the garage door opener communication.
! Programming Two-Way Communication
S03AP070414
1 Status Indicators
Within five seconds after programming a new HomeLink button, both of HomeLink’ s garage door status indicators will flash rapidly green indicating that the garage door two-way communication has been enabled. If your garage door status indicators flashed, two-way communication programming is complete.
If the garage door status indicators do not flash, additional HomeLink information and programming videos can be found online at www. HomeLink. com and www. youtube. com / HomeLinkGentex.
! Using Two-Way Communication
S03AP070415
1 Status Indicators
Recall and display( at any time) the last recorded garage door status message communicated to HomeLink by simultaneously pressing HomeLink buttons 1 and 2 for two seconds. HomeLink will display the last recorded status for three seconds.