158
Rear door window sunshades
! Sliding moonroof
1 Open 2 Close
S02AK0202
To open the moonroof:
When the moonroof switch is slid and held to the open side, the moonroof will open, then stop slightly before the fully open position to reduce wind noise.
Slide the moonroof switch again to fully open the moonroof.
To close the moonroof:
When the moonroof switch is slid and held to the close side, the moonroof will close, then stop at the tilt-up position.
Slide and hold the moonroof switch again to fully close the moonroof.
To stop the moonroof halfway, slide the moonroof switch either way.
NOTE
. After washing the vehicle or after it rains, wipe away water on the roof prior to opening the moonroof to prevent drops of water from falling into the passenger compartment.
. For the sake of safety, it is recommended that you avoid driving with the moonroof fully opened.
! Anti-entrapment function
S02AK0203
When the moonroof senses a substantial enough object trapped between its glass and the vehicle’ s roof during closure, it automatically moves back to the fully open position and stops there. The anti-entrapment function may also be activated by a strong shock on the moonroof even when there is nothing trapped.
CAUTION
Never attempt to test this function using fingers, hands or other parts of your body.
2-10. Rear door window sunshades( if equipped)
S02AT
1 Hook
The rear door window sunshades are built in the rear door trim.