Rear gate 155 |
||||||
|
However, the rear gate may open or close depending on the rear gate height when automatic operation is ceased. Be careful that the rear gate does not hit anyone’ s head or face, etc. and that fingers and baggage, etc. are not caught in it.
. Take care not to damage the touch sensors. Otherwise, the reverse function may cease to operate.
If, while opening or closing using power rear gate, the rear gate catches persons or baggage or hits an obstacle, an electronic chirp will sound 3 times and the rear gate will operate as follows.
When opening the rear gate: The rear gate will automatically close.
When closing the rear gate: The rear gate will automatically open.
|
1 Touch sensors
Touch sensors are attached on the left and right edges of the rear gate. If the touch sensors detect fingers, baggage, etc. while closing by the power rear gate function, an electronic chirp will sounds 3 times and the rear gate will open automatically.
NOTE
When the rear gate is opened using the reverse function, it will be opened fully or to the height registered in the memory function.
! Rear gate auto closure function
S02AJ0104
If, while fully opened via the power rear gate function, the rear gate is lowered by the weight of snow and such, an electronic
|
chirp will sound and the rear gate auto closure function will apply braking to the rear gate so that it prevents a rapid closure of the rear gate.
NOTE
. If there is snow on the rear gate, only use the power rear gate function after removing the snow.
. If you close the rear gate manually just after the rear gate is fully opened using the power rear gate function, the rear gate drop prevention function will detect a rapid closure of the rear gate and apply braking to the rear gate. In this case, this is not a malfunction.
! Selecting audible signal operation
S02AJ0109
Using an electronic chirp, the power rear gate will give you an audible signal before starting its operation. If desired, the audible signal can be turned off by a SUBARU dealer. Consult your SUBARU dealer for details.
You can turn the audible signal off by operating the center information display. For details, refer to“ Car settings” FP213.
The ON / OFF setting of the audible signal also works as the audible signal settings for the“ remote keyless entry system” and
|
Keys and doors |
|||
– CONTINUED – |