154
Rear gate
1 Power rear gate button
2. Press and hold the power rear gate button to register the height. An electronic chirp sounds and the hazard warning flashes for confirmation.
The rear gate will stop at the registered position when the memory function is on.
NOTE
. Register the rear gate height to turn on the“ Power Rear Gate Memory” automatically. For details, refer to“ Car settings” FP213.
. To change the registered height, perform the registering procedure again.
. It is possible to register the height from approximately 2 in( 5 cm) or more from the completely closed position.
! Deactivation of the memory function
S02AJ010103
Deactivate the memory function to open the rear gate fully. Perform either of the following operation to deactivate the memory function.
– Deactivate the“ Power Rear Gate Memory” function on the center information display. Refer to“ Car settings” FP213.
– Register the position of the rear gate at the fully open position.
! Utilizing the memorized rear gate height
S02AJ010102
To open the rear gate and stop it at the registered height, perform the following procedure.
1. Check that“ Power Rear Gate Memory” is on. Refer to“ Car settings” FP213.
2. Press and hold any of the power rear gate button.
NOTE
The rear gate will open to the position that is stored in the memory function even if the rear gate is opened by the reverse function.
! Reverse function WARNING
S02AJ0102
. Do not let parts of your body get caught when operating the reverse function. If the reverse function does not operate for some reason, this may lead to serious injury or accidents.
. The reverse function may not operate if foreign objects are caught in the rear gate just before it closes completely. Be careful not to catch your fingers and other body parts.
. The reverse function may not operate depending on the object shape and the manner in which it was caught. Be careful not to catch your fingers and other body parts.
CAUTION
. If the reverse function is operated 3 times consecutively, automatic opening and closing of the power rear gate function will be canceled and the rear gate will stop opening or closing suddenly.