Child safety locks 145
|
& If you have accidentally triggered the alarm system
S02AF03
! To stop the alarm
S02AF0301
Do any of the following operations:. Press any button on the access key fob.
. Turn the push-button ignition switch to the“ ACC” position.
NOTE
Only registered keys will stop the alarm. If the key is not registered, the alarm will not stop.
|
To exit valet mode, change the setting of your vehicle’ s alarm system to activation mode. Refer to“ Alarm system setting” FP144. |
2-6. Child safety locks |
|
|
S02AG |
Keys and doors |
& Valet mode
S02AF06
When you choose the valet mode, the alarm system does not operate. In valet mode, the remote transmitter is used only for locking and unlocking the doors and rear gate and panic activation.
To enter the valet mode, change the setting of your vehicle’ s alarm system to deactivation mode. Refer to“ Alarm system setting” FP144. The security indicator light will continue to flash once every 3 seconds, indicating that the system is in the valet mode.
Each rear door has a child safety lock. When the child safety lock lever is in the lock position, the door cannot be opened from the inside. The door can only be opened from the outside.
WARNING
Always turn the child safety locks to the“ LOCK” position when children sit in the rear seat. Serious injury could result if a child accidentally opens the door and falls out.