|
NOTE
. Press the rear lock button ten times to enter“ 0”.
. Change the PIN code frequently to protect your vehicle from theft.
. If you have lent your vehicle to another person, confirm that the PIN code has not been changed or deleted. If the PIN code has been changed or deleted, reregister a new PIN code.
. If you make an error during the registration procedure, press the“” or“” button on the access key fob. Then, start over from the procedure described in“ Preparation for registering a PIN code”.
. To protect your vehicle from theft, you cannot register a string of the same five numbers together, such as“ 00000”, nor“ 12345” as a PIN code.
. Do not register your vehicle license plate number or simple numbers such as“ 11122” or“ 12121” as a PIN code. Doing so will increase the risk of vehicle theft.
. When you try to register“ 22222”, the registered PIN code will be deleted. You cannot unlock the doors by PIN Code Access until a new code is registered.
|
. After registering a new PIN code, make sure that you can unlock the doors using the PIN code.
. The PIN code cannot be deleted while the keyless access function is disabled by operating the access key fob.
. Reregister the PIN code in the following cases. – When you forget the PIN code. – When you want to change the PIN code.
! Unlocking
S02AP2103
Perform steps( 1) to( 5) of step 5 described in“ Registration for a PIN code”.
NOTE
. You cannot unlock by PIN Code Access in the following cases. – When the access key fob is within the operating ranges. – When the ignition switch is in the
“ ACC” or“ ON” position.
. If you make an operation error during the unlocking procedure, start over with the unlocking procedure after waiting for 5 seconds or longer.
. To protect your vehicle from theft, an electrical chirp will sound if incorrect PIN codes are entered five times continuously. If this occurs, you
|
cannot unlock the doors by PIN Code Access for 5 minutes.
& Power saving function
S02AP23
To protect the access key fob battery and the vehicle battery, the keyless access function will be disabled as follows.
. When the keyless access function and the remote keyless entry system have not been used for 2 weeks or longer while all doors are locked.
. When the access key fob has been left in the operating range for 10 minutes or longer while all doors are locked.
! Recovery from power saving mode
S02AP2301
When one of the following operations is performed, the keyless access function will be recovered.
. Unlock by gripping the door handle( only when the sensors on the front passenger’ s door are not disabled) or pressing the rear gate opener button on the rear gate.
. Lock or unlock by the remote keyless entry system.
. Open a door and then close it.
. Turn the push-button ignition switch to the“ ON” position.
|
Keys and doors |
|||
– CONTINUED – |