Subaru Ascent Manuals 2025 Ascent EyeSight Driving Assist Manual | Page 108

Lane Centering Function
NOTE
• Depending on the lane detection status , the lane indicator may illuminate ( white ) on one side ( left or right ) only .
• The lane indicator does not illuminate if the function does not detect the lane markings and the vehicle is controlled by following the lead vehicle .
• The on / off status of Lane Centering Function is restored when you restart the engine .
• For models with Driver Monitoring System , Lane Centering Function may not operate because Driver Monitoring System cannot detect driver ’ s state , has a malfunction or has stopped temporarily . For details about Driver Monitoring System , refer to the vehicle Owner ’ s Manual .
■ Canceling Lane Centering Function
●Canceling by driver operation
Any of the following operations temporarily cancels Lane Centering Function .
While temporarily canceling this function ,
/
( Lane Centering indicator ) on the combination
meter display illuminates in white .
• Depressing the brake pedal
• Pressing the
( CRUISE ) switch to cancel Adaptive Cruise Control
• Operating the turn signal lever
●Automatic cancellation by the system Under the following conditions , a notification sounds 1 short beep and 1 long beep , and Lane Centering Function is temporarily canceled . While the function is temporarily canceled ,
/ ( Lane Centering indicator ) on the combination meter display illuminates in white . Also , an interruption screen is displayed on the combination meter display .
( 1 )
• The system does not detect the lane markings and the lead vehicle .
• Adaptive Cruise Control is automatically canceled .
( 1 ) White
H02096
106