52
Seat ventilation
1-3 . Seat ventilation ( if equipped )
S01AR
The seat ventilation are equipped in the front seats .
The seat ventilation operate when the ignition switch is in the “ ON ” position .
CAUTION
. Do not put hard or heavy objects or ones with protrusions on the seat , and do not stab the seat with sharp objects , such as pins or needles .
. When cleaning the seat , do not use organic solvents , such as thinner , benzene , or alcohol .
. If water or liquid is spilled on the seat , wipe it off with a dry cloth immediately .
NOTE
. Use of the seat ventilation for a long period of time while the engine is not running can cause battery discharge .
. The seat ventilation function cannot be used simultaneously with the front seat heater .
. When using for a long period of time , we recommend setting the seat ventilation to the MID or LOW position . Use the HIGH position for only quick cooling at the start of the function usage .
Adjust the seat ventilation function on the center information display . Refer to “ Front seat ventilation ” FP292 .
1-4 . Seatbelts & Seatbelt safety tips
WARNING
S01AE
S01AE01
. All persons in the vehicle must fasten their seatbelts BEFORE the vehicle starts to move . Otherwise , the possibility of serious injury becomes greater in the event of a sudden stop or accident .
. All belts should fit snugly in order to provide full restraint . Loose fitting belts are not as effective in preventing or reducing injury .
. Each seatbelt is designed to support only one person . Never use a single belt for two or more persons – even children . Otherwise , in an accident , serious injury or death could result .
. Replace all seatbelt assemblies including retractors and attaching hardware worn by occupants of a vehicle that has been in a serious accident . The entire assembly should be replaced even if damage is not obvious .
. Never use a belt that is twisted or