Subaru Ascent Manuals 2023 Ascent Owner's Manual | Page 57

Seat heater 51
running can cause battery discharge .
. When using for a long period of time , we recommend setting the air ventilation to the MID or LOW position . Use the HIGH position for only quick heating at the start of the function usage .
& Front seat heater
S01AB05
Adjust the front seat heater function on the center information display . Refer to “ Front seat heater and ventilation ” FP291 .
NOTE
The front seat heater function cannot be used simultaneously with the seat ventilation ( if equipped ).
& Second-row seat heater
S01AB07
Second-row seat heater switch 1 Right side 2 Indicator lights 3 Left side
Press the second-row seat heater switch . Each time you press the switch , the mode will change as follows .
even if the vehicle has restarted . The second-row seat switch will reset .
Seat , seatbelt and SRS airbags
CAUTION
Do not open and close the center console lid while operating the second-row seat heater switch . There is the risk of fingers being caught in the lid .
2 indicator lights are illuminated in HIGH mode , and 1 indicator light is illuminated in LOW mode . All indicator lights turn off when the heater is switched OFF .
NOTE
Only the front seat heater switches retain the previous switch position