400
Reverse Automatic Braking ( RAB ) system
NOTE
The Sonar Audible Alarm function and Automatic Braking function are different in operation conditions . Therefore there are cases in which only one of these functions will activate .
WARNING
Depress the brake pedal immediately after the system stops the vehicle by automatic braking . Depending on the conditions of the road surface and tires , the vehicle may not remain stopped , possibly leading to an accident .
! After the vehicle is stopped by the system
S07BN0802
After the brake pedal is depressed , the RAB OFF indicator will illuminate and the system will temporarily stop operating . The RAB OFF indicator will turn off when the select lever is shifted to a position other than the “ R ” position .
The system will operate again the next time the select lever is shifted to the “ R ” position .
NOTE
. In the following cases , after the vehicle has been stopped by the Reverse Automatic Braking ( RAB ) system , brake control is released and the electronic parking brake operates . For details about releasing the parking brake , refer to “ Electronic parking brake ” FP374 . – When 2 minutes pass after the vehicle is stopped – When any door is opened
. The Reverse Automatic Braking ( RAB ) system may stop operating temporarily in the following cases and the RAB OFF indicator will illuminate . – Ice , snow or mud is adhered to the sonar sensors or the rear bumper near the sonar sensor – Objects are too close to the rear bumper when the select lever is set to the “ R ” position
– The system detects sounds of a similar frequency to the RAB sonar
& Canceling the Reverse Automatic Braking ( RAB ) system operation
S07BN04
The Reverse Automatic Braking ( RAB ) system can be temporarily canceled by any of the following operation .
. While the vehicle is stopped by the operation of automatic braking , the brake pedal is depressed .
. While the vehicle is stopped by the operation of automatic braking , the accelerator pedal is depressed .
. The accelerator pedal is depressed continuously ( In this case , limited acceleration will be canceled and the vehicle will continue reversing .)
. The select lever is shifted to a position other than the “ R ” position .
NOTE
The system will be canceled if the object is no longer detected .