246
Mirrors
When you move the select lever from the “ R ” ( reverse ) position to another position , the rear wiper will return to intermittent operation .
Reverse gear interlocked rear wiper :
Even if the rear wiper switch is in the off “ ” position , if the front windshield wiper is operating continuously , the rear wiper will operate intermittently when you move the select lever to the “ R ” ( reverse ) position .
The factory setting ( default setting ) of the reverse gear interlocked rear wiper is as follows .
. U . S . -spec . models : Non-operational . Other models : Operational
This setting can be changed by a SUBARU dealer . Consult your SUBARU dealer for details .
CAUTION
Do not attach anything that disturbs the rear wiper operation on the rear gate . Doing so may damage the rear wiper when it operates .
! Washer
S03AM0202
To wash the rear window , turn the knob to the “ ” position . The washer fluid sprays and the wiper operates until you release the knob .
The rear view camera washer also operates while the rear window washer is operating .
3-17 . Mirrors
S03AP
Always check that the inside and outside mirrors are properly adjusted before you start driving .
& Inside mirror ( if equipped )
S03AP01
1 Normal position 2 Anti-glare position
Push the tab on the mirror for normal use . To reduce glare from the headlights of the vehicle behind you , pull the tab to the antiglare position .