232
Light control switch
“ ” position :
Instrument panel illumination , headlights , parking lights , front side marker lights , rear side marker lights , tail lights and license plate lights are on .
“ ” position :
Instrument panel illumination , parking lights , front side marker lights , rear side marker lights , tail lights and license plate lights are on .
“ ” position : . Auto on / off headlights
When the ignition switch is in the “ ON ” position , the instrument panel illumination , headlights , parking lights , front side marker lights , rear side marker lights , tail lights and license plate lights are automatically on or off depending on the level of the ambient light .
NOTE
The light sensitivity of the auto on / off headlights can be changed by operating the center information display . For details , refer to “ Car settings ” FP215 . Also , the setting can be changed by a SUBARU dealer . Consult your SUBARU dealer for details .
. If the light control switch is in the “ AUTO ” position and the headlights do not turn on when it becomes dark
outside , turn the light switch to the “ ” position .
. Auto-on / off wiper-linked headlights
While the light control switch is in the “ AUTO ” position , the headlights will automatically turn on when the windshield wipers operate several times . The headlights will automatically turn off when the wipers stop .
NOTE
The ON / OFF setting of this function can be changed by a SUBARU dealer . Consult your SUBARU dealer for details .
“ ” position ( except for Canada models ):
The headlights are all off .
Only when the following conditions are fulfilled , instrument panel illumination , headlights , parking lights , front side marker lights , rear side marker lights , tail lights and license plate lights are automatically on or off depending on the level of the ambient light .
. The engine is running . . The parking brake is fully released .
. The select lever is in a position other than the “ P ” position .
“ OFF ” position ( for Canada models ): The headlights are all off * 1 * 2 . * 1 : When the light switch is switched to the “ OFF ” position while the vehicle is stopped , the lights turn off . Then the light switch will automatically return to the “ AUTO ” position .
* 2 : The headlights will automatically change to the AUTO mode when the following conditions are met :
. The engine is running .
. The parking brake is fully released .
. The select lever is in a position other than the “ P ” position .
! Welcome lighting function
S03AH0103
The welcome lighting function turns on the low beam headlight for smooth approaching to or exiting from the vehicle at night or in a dark place .
The function is activated while all of the following conditions are met .
. The light control switch is in the “ AUTO ” position .
. It is dark enough to turn on the auto on / off headlights .
NOTE
If the engine is turned off after turning off the light switch , the welcome lighting function may not operate ( for