Service Center Solahart (081313462267) water heater | Page 18

33-1197 Solahart Owner‟s Manual – Thermosiphon Systems - Revision H – Nov 2013

16

Thermosiphon Pipe Shroud Cover
The function of the Pipe Shroud Cover is to cover the plumbing pipe-work and electrical connections to the thermosiphon
tank, including the drain line from the temperature pressure relief valve, without restricting pipe runs for the installation or
the operation of the TPR valve.
KIT CONTENTS

The Thermosiphon Pipe Shroud Cover Kit consists of:
Component
Part No

Kit 12104050 Thermosiphon Pipe Shroud Cover Kit
Component Description

Quantity

208002

Pipe shroud cover

1

330370

Screw 8G x ½” pan head stainless steel

5

207501

Installation instructions

1

PIPE WORK AND CONNECTIONS

The installation of the pipe work and electrical connection is to be planned so their position aligns with the cut-outs at the
rear of the Pipe Shroud Cover.
The pipe work should also be positioned with any roof penetrations behind the solar storage tank to maintain the
aesthetics of the installation.
The pipe work, including the TPR valve drain line, shall not obstruct the hexagonal electrical cover.
The pipe work is to be installed to allow the fitting of the Pipe Shroud Cover without any distortion.
The TPR valve drain line must have a continuous fall and be installed in accordance with the installation instructions.
The installation of valves must be in accordance with national and local codes and regulatory authority requirements.
Penetrations through the roofing material must be at the high point of the roof tile or metal sheet, made neatly and kept
as small as practicable and be waterproofed.

Installation with a HartStat Over Temperature Protection System

Installation without a HartStat Over Temperature Protection System