S I C E S
Estudio del comportamiento de la cal como estabilizante en arcilla altamente plástica en la aldea Santa Rita de Oriente, municipio de Santa Bárbara, departamento de Santa Bárbara, Honduras, 2016.
Williams Fernando Mendoza Aly, Laura Marcela Salgado Valladares, René Alejandro Valladares Paz, Héctor Rolando López Marín, Néstor Marcía Caballero y Francisco Antonio Varela
Resumen: Se realizaron diversas pruebas para caracterizar el suelo ante el cual se pretendía hacer la estabilización, se eligió la cal hidratada como el aditivo más favorable debido a la reducción que genera en la plasticidad de los suelos expansivos, por su bajo costo y por su facilidad de obtención en la zona de estudio. Se realizaron probetas con diferentes porcentajes de cal hidratada y con la humedad óptima del suelo dejando curar por siete días a una temperatura constante de 20 ° C para posteriormente realizar pruebas de esfuerzo axial y determinar su resistencia. En la extracción de las probetas se presentaron dificultades debido a la maleabilidad o resequedad de la mezcla suelo-cal lo cual se vio reflejado en los resultados de carga axial.
Para determinar el porcentaje de cal óptimo para la muestra se realizaron pruebas de pH, se obtuvo un valor inicial para la iteración de porcentajes de cal añadido junto al porcentaje de humedad óptimo del suelo. Para el suelo en estudio se encontró que un 11 % de cal mejora las capacidades mecánicas del suelo, se obtuvieron esfuerzos axiales mayores a 2 kg / cm 2 y reducción notable de su plasticidad observado mediante su deformación longitudinal durante las pruebas de carga.
Palabras claves: Arcillas expansivas, Resistencia axial, potencial de expansión, humedad óptima, índices de plasticidad.
Abstract: Several tests were carried out to characterize the soil before which stabilization was intended, hydrated lime was chosen as the most favorable additive due to the reduction it generates in the plasticity of expansive soils, due to its low cost and its ease of Obtaining in the study area. Specimens were made with different percentages of hydrated lime and with the optimum humidity of the soil, allowing it to cure for seven days at a constant temperature of 20 ° C, to later perform axial stress tests and determine its resistance, in the extraction of the test tubes there were difficulties due to the malleability or dryness of the soil-lime mixture which was reflected in the results of axial load.
To determine the optimum percentage of lime for the sample, pH tests were carried out, thus obtaining an initial value for the iteration of percentages of added lime together with the percentage of optimum soil moisture. For the soil under study it was found that 11 % of lime improves the mechanical capacities of the soil obtaining axial stresses greater than 2 kg / cm 2 and notable reduction of its plasticity observed by its longitudinal deformation during load tests.
Key words: expansive clays, axial resistance, expansion potential, optimal humidity, plasticity indices.
63