￭ Multiple NAS units share USB UPS
The network UPS "master" is connected to the UPS via USB cable. If the power fails, the UPS sends a notification to the
network UPS "master" via USB and all the UPS "slaves" are informed by the UPS master via Ethernet. To set your Turbo NAS
as a UPS "slave": connect the UPS and the Turbo NAS by USB, select [NetworkUPS slave], enter the IP address of the master
server, so the slave server will get notification when the power fails.
UPS support
UPS
TS-x53
Step 1: Select "Network UPS slave"
Step 2: Enter the IP address of
the master server
USB signal
detection
UPS AC power
AC mains
UPS AC power
WiFi Router
UPS supporting
SNMP
Switch
Ethernet
TS-x53
AC mains
UPS AC power
UPS AC power
UPS AC power
UPS AC power
TS-x53 (UPS Master)
USB signal
detection
UPS
Low power shutdown signal
UPS AC power
AC mains
Ethernet
Ethernet
UPS AC power
TS-x53 (UPS Slave)
TS-x53 (UPS Slave)
UPS AC power
UPS AC power
WiFi Router
20
TS-x53 Pro/SS-x53 Pro，Powered by QNAP's exclusive QvPC Technology