QTS 4.1 OS
Uninterruptible Power Supply (UPS)
Activate the UPS support to ensure the Turbo NAS is properly shutdown if power fails. In the event of a power failure the Turbo
NAS will shut down automatically or enter auto-protection mode by probing the power status of the connected UPS unit. You
can set up the function by clicking QTS [Control Panel] > [System Settings] > [External Device] > [UPS].
￭ Case study for NAS connecting to a USB UPS
You can set the Turbo NAS to shut down or enter auto-protection mode if the power fails, and determine the action after few
minutes of the power failure. Once the auto-protection mode is activated, the Turbo NAS will revert to the state before power
failure and continue to operate when the power restores.
UPS support
UPS
TS-x53
USB signal
UPS support
detection
UPS
TS-x53
UPS AC power
AC mains
UPS AC power
WiFi Router
USB signal
detection
UPS AC power
AC mains
UPS AC power
WiFi Router
￭ UPS with SNMP management
UPS supporting
SNMP
Switch
When the Turbo NAS and the SNMP-based UPS server connect to the same network, you can select [SNMP connection] and
enter the IP address of SNMP UPS server to set up the power failure notification.
Ethernet
TS-x53
Switch
UPS AC power
UPS supporting
SNMP
AC mains
Ethernet
TS-x53
UPS AC power
UPS AC power
UPS AC power
AC mains
UPS AC power
UPS AC power
19
UPS AC power
UPS AC power
TS-x53 (UPS Master)
TS-x53 Pro/SS-x53 Pro，Powered by QNAP's exclusive QvPC Technology
USB signal
detection
UPS