Direct Fastening Technical Guide , Edition 24
3.2.19.3 TECHNICAL DATA
Recommended loads for X-IE 6 Fasteners 1 , 2
Base Material
Tension lb ( kN )
Shear lb ( kN )
Concrete 3 90 ( 0.4 ) 90 ( 0.4 ) CMU Masonry Walls 4 45 ( 0.2 ) 45 ( 0.2 )
Solid Brick 45 ( 0.2 ) 45 ( 0.2 ) Steel 5 135 ( 0.6 ) 135 ( 0.6 )
1 The tabulated allowable load values are for the X-IE 6 fasteners only . For pull-over of the insulation material under tension , please consult insulation material supplier . 2 Multiple fasteners are recommended for any attachment . 3 Based on attachment to concrete ( f ' c
= 2000 psi - 6500 psi ).
4 Wall must be fully grouted . 5 Based on attachment to 1 / 8 " or 1 / 4 " thick steel ( Fy = 36 to 50 ksi ).
Allowable loads for X-SW Fasteners 1 , 2 , 3
Description
Tension lb ( kN )
Shear lb ( kN )
X-SW 65 ( 0.30 ) 65 ( 0.30 )
1 Multiple fasteners are recommended for any attachment . 2 Loads valid for fastener strength . Fastened material must be considered separately . 3 Based on attachment to concrete ( f ' c
≥ 4000 psi ).
119