HARNESSES
HELMETS
Lanyard with energy absorber for
ASAP or ASAP LOCK
• Attaches the ASAP or ASAP LOCK mobile fall
arrester to the harness
• Allows the user to distance himself from the rope
in order to:
- declutter the work area
- protect the rope from sharp tools and molten
metal splash
• Absorb the energy of a fall by the tearing of
specific stitching
• Zippered fabric pouch protects the energy
absorber from abrasion and other damage while
allowing for regular inspection of the absorber
• Ends equipped with STRING to hold the
connector in position and protect the sling from
abrasion
• Available in two lengths for choice of the best
balance between distance from the rope and
reducing the fall length:
- ASAP’SORBER (L71AA 20): 20 cm, 75 g
- ASAP’SORBER (L71AA 40): 40 cm, 105 g
• Clearance: see explanations in the Instructions
for Use and the Product Experience supplement
available at www.petzl.com/ASAP
• Certification(s): CE EN 355, EAC
DESCENDERS
• Constant fall protection:
- arrests falls, slides, and uncontrolled descents
- works on vertical or angled rope
- locks on the rope even if grabbed during the fall
• Simple to use, and effective:
- moves up or down the rope without any manual
manipulation of the device
- easy to install and remove at any point on the rope
- may be combined with an ASAP’SORBER energy
absorbing lanyard to work at a distance from the
rope
• Comes with a OK TRIACT-LOCK automatic
locking carabiner
• Rope compatibility:
- use according to standard EN 353-2:
AXIS 11 mm rope with sewn termination
- use according to standard EN 12841 type A:
10 to 13 mm ropes, EN 1891 type A
• Weight: 370 g (295 g for ASAP and 75 g for OK
TRIACT-LOCK)
• Certification(s): CE EN 353-2,
CE EN 12 841 type A, EAC
ROPE CLAMPS
Mobile fall arrest device
ASAP’SORBER
PULLEYS
B71AAA
ANCHORS
ROPES
®
VERTICALITY
PACKS
ACCESSORIES
ASAP
CONNECTORS
MOBILE FALL
ARRESTERS
LANYARDS
ENERGY
ABSORBERS
Find all the possibilities of the ASAP mobile fall
arrester at www.petzl.com/ASAP.