PCS Specification Guide 2024 2024 | Page 49

VANITY CABINETS

49
Decorative End Panels for Vanity Cabinets ( D )
• Must be field installed
• Decorative End Panel ordered and packaged separately
• Can be fastened to the side of any standard size cabinet
• Actual size of end panels 1 / 8 " smaller in both width and height than the dimension code
• ( Example : D2130 actual size is 20 7 / 8 " x 29 7 / 8 ")
• Finished ends should also be ordered to cover exposed areas
VANITY HEIGHT Standard ( 31 1 / 2 ") Tall ( 34 1 / 2 ")
MODEL NUMBER
D2127 D2130
VANITY CABINETS
Floating Sink Vanity Wall Cabinet ( VW )
21 1 / 4 "
• Depending on bowl cutout , front rail may need field reinforcement
• Back is 5 / 8 " thick
WIDTH INCHES
21 24 24 27 30
MODEL NUMBER
VW21L / R * VW24SL / R * VW24 VW27 VW30
WIDTH INCHES
33 36 39 42
MODEL NUMBER
VW33 VW36 VW39 VW42
21 "
* Must specify Left or Right ( L / R )
Floating 2 Drawer Vanity Wall Cabinet ( VW2D )
21 1 / 4 "
• Drawer fronts are 10 1 / 2 " tall , interior clearance is 8 3 / 4 "
• Back is 5 / 8 " thick
WIDTH INCHES
12 15 18 21 24
MODEL NUMBER
VW2D12 VW2D15 VW2D18 VW2D21 VW2D24
21 "
Tips for Installing Floating Vanity Wall Units
• Units typically installed 9 " to 13 " off floor
• Plywood hang rail provides reinforced support
• Use a minimum of 4 anchors per cabinet ( into studs ), otherwise :
• Build half depth toe kick , or
• Use legs on front , or
• Use cleat on wall below cabinets
• Properly installed units will support up to 300 lbs . of weight atfront ; however , you should not stand on these cabinets
Cut out for sink bowl
9 " -13 " off Floor