METASYS BUILDING MANAGEMENT SYSTEM
PROGRAMMABLE CONTROLLERS
METASYS CONTROLLERS
RM
INPUT / OUTPUT MODULES
The Romutec Input / Output Modules are point expansion modules compatible with the Johnson Controls family of Field Controllers and Network Controllers and integrate seamlessly into the Metasys system . They are designed to provide additional inputs and outputs for all compatible controllers that are programmed with the controller configuration tool ( CCT ). A full range of Field and Network controllers and Romutec IO Modules allow various combinations , which will meet the requirements from simple to advanced building applications .
Romutec Input / Output modules can be used when manual overrides are required or when control panel space is limited and a small footprint is needed .
Six models of IO modules are offered with different combinations of BI ’ s , BO ’ s , AI ’ s and AO ’ s . In addition to the standard models optional manual override modules are available . Manual override modules come in two versions , one which can be used inside a control cabinet ( DIN rail mounting ) and the other for fixing on the cabinet door ( front panel mounting ). The manual override modules are connected with a USB type cable directly to their corresponding host IO Module . They are preconfigured so setting up requires nothing more than selecting the appropriate DIP switch settings .
Six additional models are also available to meet the requirement for DIN rail mounted IO modules with integral overrides and point status LED ’ s .
Some models include a connector that can be used to lock the operation of manual overrides , i . e . if a signal is applied , the positions of the switches have no influence , and the outputs will behave as if all switches are in the “ Automatic ” position .
FEATURES
• Small footprint , compared with the Metasys ® Input / Output module ( IOM ) series .
• Manual overrides available as an option . Integral manual overrides for AO and BO on selected models .
• Models available for indicating the status of binary inputs with LED ’ s .
• Models available with input to remotely lock the operation of manual overrides .
• Easy engineering as supported by CCT ( Controller Configuration Tool ).
• Quick engineering for manual overrides as all modules are preconfigured .
• Connected to the SA Bus of the compatible controller .
• Equipped with fault and status LED ’ s for troubleshooting .
• Pluggable terminals with spring clamp for quick and simple wire termination without special tools .
• NEW - All models have a refreshed design to compliment the new generation of Metasys controllers .
118
European Products Catalogue 2021