Geometry accuracies
And for the most demanding requirements:
1/2 tolerance as an option
( ) values = increased accuracy. Item no. GEO.5xx-GEN
Parallelism
Spindle surface to support surface
Tilt drift
Change in the angle between the
dividing / indexing axis and tilting
axis during the tilting movement
from -90° to 0°
EA
+ M
Perpendicularity
Dividing / indexing axis to tilt axis
Overview
Geometry of TF and T1 rotary tables
T1
TF
-90°...0°
0.01/100 mm (0.005/100 mm)
0.01/R 200 mm (0.005/R200 mm;
applies only to T1)
Axis parallelism
Spindle 2, 3 and 4 to spindle 1
Tilt drift
Change in the angle between the
dividing / indexing axis and tilting
axis during the tilting movement
from -90° to 0°
T2
/ T3
0.01/100 mm (0.005/100 mm)
Perpendicularity
Dividing / indexing axis to tilt axis of
spindle 1
MOT / KAB
WMS / CNC
Geometry of T2...4 rotary tables
RFX/LFX
-90°...0°
0.01/100 mm (0.005/100 mm)
0.01/R 200 mm (0.01/R200 mm)
Workpiece
clamping
0.01/100 mm (0.005/100 mm)
Center distance X1, X2 and X3
General
accessories
on request
0.02 mm (0.01 mm)
Technology /
engineering
For all rotary tables
Radial and axial runout for all rotary
table versions
– measured at spindle nose
– Axial runout on largest diameter
– Radial concentricity of the inner bore as
well as centering ø
0.006 mm (0.003 mm)
71