Geometry accuracies
High geometric accuracies as standard,
combined with a high level of rigidity
and stability
( ) values = increased accuracy. Item no. GEO.5xx-GEN
EA
+ M
Overview
The tolerances given below apply under the following conditions:
1. The rotary table is mounted as specified in the commissioning instructions
2. The measurement is carried out on a calibrated granite plate (all machine errors are excluded)
3. The rotary table is not subjected to any outside thermal influences (sun, fans, heaters...).
4. P rior to the measurement, the rotary table and the measuring and test equipment have been in the same environment
for at least 24 h
5. All measured values are determined for an unloaded rotary table
Perpendicularity
Spindle surface to support surface
Parallelism
Spindle axis with support surface
Center height
0.01/100 mm (0.005/100 mm)
0.01/100 mm (0.005/100 mm)
0...0.04 mm
Parallelism with support surface
Parallelism with tilting axis
For longFLEX, see p. 41
0.007/100 mm (0.0035/100 mm)
0.01/300 mm (0.005 /300 mm)
MOT / KAB
WMS / CNC
T2
/ T3
T1
TF
Geometry of EA rotary tables
Workpiece
clamping
RFX/LFX
Geometry of EA rotary tables with rotoFIX
Geometry of M rotary tables
Parallelism
Spindle axis with support surface
Center height
0.01/100 mm (0.005/100 mm)
0.01/100 mm (0.005/100 mm)
0...0.04 mm
Axis parallelism
Spindle 2, 3 and 4 to spindle 1
Center distance X1, X2 and X3
Depth difference of the spindles
0.01/100 mm (0.005/100 mm)
0.02 mm (0.01 mm)
General
accessories
Perpendicularity
Spindle surface to support surface
Technology /
engineering
A
on request
70