1 |
IF TRACK |
HANGER
1
UNLOCK
|
LOCK TABS |
2 |
2
3
|
ATTACH
Engage Soft Close Dampener by pushing Dampener trigger toward 3 Wheel Roller .
2 " ( 51mm )
|
2 " ( 51mm )
1121
|
IMPORTANT MUST BE ENGAGED
NO
SHOWN IN " ENGAGED " POSITION
4
INSERT 1060 " ENGAGED " POSITION
5
INSERT 1060 Actuator Arm into track , with back of Actuator Arm 1-1 / 2 " ( 38mm ) from each end of track , ( 24 " doors : Actuator will be flush with end of track ). HAND TIGHTEN ( do not use power drill ) Actuator Arm on track legs . Check to make sure Arm remains straight in track . 1-1 / 2 " ( 38mm )
1-1 / 2 " ( 38mm )
LOCK
6
INSTALL track and hang door .
NOTE : Actuator Arm may have to be moved to reattach track to header .
LOCK
SLOWLY slide door toward Jambs , checking to make sure door touches Jamb , if not . Slide door away from Jamb and readjust Actuator Arm . Slowly close door again , checking to make sure soft close is working properly . Once confirmed , begin using door normally .
PLEASE CALL 1-800-837-5664 IF PARTS ARE MISSING / DO NOT RETURN TO PLACE OF PURCHASE |
IN1060SC |
L . E . JOHNSON PRODUCTS , INC . - 2100 STERLING AVE . - ELKHART , IN USA 46516 - ( 574 ) 293-5664 |
Rev 12 / 15 |
|
------INSTRUCTION SHEET IS SUBJECT TO CHANGE------ |
|