pRotEctiVE coAtinGS EquipmEnt SElEction GuidE
Atomization Specialty Spray Guns
Automatic Airless Spray Guns - High Pressure
Model 30
Model 550
Binks Model 550
Automatic airless gun for spraying protective coatings such as
lacquers, enamels, waterbased emulsions, mold release agents,
and sound deadeners. Spray gun equipped with tip guard,
stainless steel fluid passages, and forged aluminum spray gun
body. Actuating air pressure is 40-60 psi. The material body may be
installed in any of four positions to facilitate fluid hose connection.
Binks Model 570
Binks Model 30 Bead Gun
(& Model 30A High Flow)
Designed for laying out glass bead during a line
striping operation. Use on hand line stripers or
moving trucks.
n Will spread glass beads at a rate of 20 lbs.
per minute
Same as Model 550, but constructed with larger fluid inlet opening
and fluid passages. Used for spraying heavy materials such as
mastics and undercoatings.
Spray tip is not included, order separately.
(Maximum operating pressure is 3000 psi.)
Specifications:
n Part Number: Model 550 - 6700-000-5, Model 570 - 6700-0000-7
n Air Inlet: Model 550 - 1/4" nps (m), Model 570 - 1/4" nps (m)
n Fluid Inlet: Model 550 - 1/4" nps (m), Model 570 - 1/2" npt (f)
n Weight: Model 550 - 24 oz., Model 570 - 40 oz.
Service Bulletin: Model 550 - 77-2120, Model 570 - 77-2122 n Pneumatically operated using a minimum
of 50 psi
Binks Model 140B Model 190 Air Blow Gun
Use for spraying solvents to
clean engines and other machinery.
n Furnished with four nozzle inserts with
orifice diameters of 7/32", 1/4", 9/32"
and 11/32"
Specifications:
Part Number:
Standard Model 30 Bead Gun - 6279-0000-1
Model 30 Bead Gun with Big Bore - 6279-0000-5
n
n
Weight: 6 lbs. 1 oz.
Service Bulletin: 77-2151
Use for dusting, drying, removing
chips, etc. from surfaces.
n Pistol grip style with aluminum
die cast body
n Nozzle part number 60-40 (complies with
paragraph 50-204 Walsh-Healy Act and
OSHA where air inlet does not exceed
100 psi with 1/16" orifice is standard
n Also available with part number 60-41 5-1/2"
extension (optional)
Specifications:
n Part Number: 6580-000-1
n Air Inlet: 1/4" NPT (m)
n Air Consumption: 3.5 CFM at 50 psi
Service Bulletin: 77-1108
Features a rugged brass body
n Ten inch nozzle/tube length for hard to reach places
n Includes flexible tubing with hose clamp for
siphoning solvent from a container
Specifications:
n Part Number: 6530-000-1
n Air Inlet: 1/4" NPS (m)
n Requires 14 CFM air at 50 psi
Service Bulletin: 77-1191
n
finishingbrands.com
n
Protective Coatings Equipment Selection Guide
# A28-107R-2 01-15
n
Pg 8/28