Atomization Specialty Low Pressure Spray Guns
Binks Model 7E2
Designed for spraying heavy bodied
and filled materials such as non-skid,
roof coatings, block fillers and others.
n Extra-Large fluid passages for
maximum fluid flow
n Durable drop forged, plated brass
spray head
n Adjustable floating needle valve and
stainless air valve cartridges
n
6102-2900-7 7E2 GUN 44SS-1/4
n 6102-3525-9 7E2 GUN 46SS-391
n 6102-3600-7 7E2 GUN 45SS-1/4
n 6102-3601-7 7E2 GUN 45SS-3/8
n 6102-3602-3 7E2 GUN 45SS-3/8F
n
Specifications:
Air Inlet: 3/8" nps (m)
Fluid Inlet: 3/4" nps (m)
n Weight: 30 oz.
Nozzle extensions are designed to reach out of the way
places, such as the inside of large and small diameter
pipe. There are models for general use and for specific
applications. Extensions are available for both air atomizing
and airless spray guns. See page 10 for airless extensions.
n
EA
1 3/4
EAX
7/8
EB
3
90 °
EBX
90 °
EN
Binks Model 2100GW
The Binks 2100GW spray gun is a
hand-held, spray gun for limited
application of two-component
materials such as gel-coats or
polyesters. The trigger action
stops and starts spraying both
materials simultaneously.
Standard Set-Ups Available:
2100GW Gun w/66SSx66SD (2100-4307-9GW)
n 2100GW Gun w/68SSx68PB (2100-5111-5GW)
n
Specifications:
Air Inlet: 1/4" nps (m)
n Fluid Inlet: 3/8" nps (m)
n Weight: 24 oz.
1 7/8
Standard
Lengths
(inches) Part
For Gun Sheet
Model Reference
(77- )
Std. External or
Internal Mix* 9, 15, 24, 36 2100,
2659,
95, 95A, 1368,
2660
95AR
External or
Internal Mix* ♦
45 °
ERX
# A28-107R-2 01-15
n
Pg 7/28
2100,
95, 95A
1371, 2659,
2660
1 3/4 External or
Internal Mix* ♦ 2100,
95, 95A 1373, 2659,
2660
1 7/8 External or
Internal Mix* ♦ 2100,
95, 95A 1374, 2659,
2660
2100,
6, 12, 18, 24,
21
36, 48, 60,
Circular (360°)*
72, 84, ♦
12, 24, 36, 48, 95, 95A,
60, 72, 84
95AR 1367,
2082,
2659, 2660
HC ■
90 °
2100, 21, 1372, 2659,
95, 95A,
2600
95AR
3/8 9, 12, 18, 27, 2100, 21,
1328,
Circular (360°)* 33, 39, 51, 63, 95, 95A 2659, 2660
75, 87, ♦
SA 7/16 Round
(Not Adjustable) ♦ 2100, 95, 1328, 2659,
95A
2660
CVT 1 1/8 Same as for
Models C and HC
Except Nozzles
have Tungsten
Carbide Inserts* ♦ 2100,
95, 95A
90 °
HCVT ■
52-1382 1 3/8
52-2410 3/4
2083,
2659, 2660
Special for
Pipe Interior
Circular 360° 1/4"
Gun
Pipe
Not
Not Included Required —
Circular 360° 5/16" I.D.
Fluid Hose 2100, 95
and Clamps
Not Included —
n
Service Bulletin: 77-2936
6, 12, 15, 18, 2100, 21, 1370, 2659,
24, ♦
95, 95AR
2660
6, 12, 18,
36, 48, ♦
3/4
SC
1369, 2659,
2660
Std. External or
Internal Mix*
30 ° Reverse
C
2100,
95, 95 A
♦
2 1/2
ENX
Std. External or
Internal Mix*
♦
External or
Internal Mix*
45 °
n
Service Bulletin: 77-1341
Nozzle
Set-Up
Clearance
Diameter
(inches)
Comfortable hardened steel, four finger trigger
Standard Set-Ups Available:
Gun Extensions
*See Nozzle and Needle Selection in the Conventional Spray Guns & Accessories Guide
KEY CODE: ■ = High volume material flow.
♦ = Any length not shown made to order (custom).
= Extension is available with stainless steel fluid nozzle having tungsten carbide insert.
Specify “VT” when ordering. See nozzle setup table.
finishingbrands.com
n
Protective Coatings Equipment Selection Guide