Settings & Use
You can always set up the alert threshold with your own preference and riding style through the RideControl app and remote controls.
1. You can set up preferred tire pressure alert threshold through both RideControl app and remote controls:
• RideControl app: E-bike Setup > Aegis Tire Checker Setup
• Remote controls: Settings > Accessories > Tire pressure sensor > Tire pressure limit
2. The tire pressure will be displayed not only in the startup animation following the battery level indication. You can also read the instant tire pressure by adding a data field in the riding screen or on the RideControl app in the Aegis Tire Checker setting menu.
3. The Aegis Tire Checker is ultra-sensitive. In general, by turning on the e-bike you can read the tire pressure instantly. If not, try to move the bike or roll the wheels to activate the tire checker.
4. The Aegis Tire Checker will notify you if the tire pressure is below / over the setting value or when the tire pressure has a rapid drop. The notification will be sent on both the e-bike display and RideControl app with acoustic alert. For your own safety, when warned with an abnormal tire pressure, please stop by and check if’ s a puncture or simply because the pressure is too low.
5. The LED indicator at the front side shows the status of the Aegis Tire Checker, refer to the chart below for detailed information.
Color Green Red Red Red and green
Behavior Blinking( 2 secs interval) Blinking( 2 secs interval) Blinking( 1 sec interval) Blinking( 1 sec interval)
Status The Aegis Tire Checker is activated Battery low Abnormal tire pressure detected The firmware is updating
5