Field Installation and Service Manual IMS121 | Page 17

Step 10
10.1
Secure The Laminate Top in Place
Predrill holes for the screw placements that will attach the Laminate Tops to the cabinets.
In the front of the cabinets, drill a hole within 3” of any cabinet side or pair of sides and no farther than 16” apart overall.
In the back of the cabinets, drill a hole within 3” of an end and no farther than 48” apart overall.
Wall
A
Build Up Set Back 3/4”
for Flush Overhang
Attachment Screw Placements For Laminate Tops
Predrill Attachment Holes at Front
Within 3” of Cabinet Sides and
No Further than 16” apart
Build Up
Predrill Attachment Holes at Back
Within 3” of Cabinet Ends and
No Further than 48” apart
Wall B
121
10.2
Move
the joined
Laminate
Top back into
place and
confirm the fit.
Fasten the
Tops with #7 x
1-5/8” flathead
screws at the
predrilled loca-
tions.
©2017 PCS Professional Cabinet Solutions. All Rights Reserved.
Section 1: IMS 121
17