Field Installation and Service Manual IMS121 - Page 11

7.3 Prefit the Endsplash to confirm it is the correct length for the scribed Laminate Top end. It must be flush to the front of the top and flush to the top of the backsplash. It must also be cut flush on it’s bottom edge to the underside of the laminate top and will not interfere with the top of the cabinet. (See 7.1) Flush Trace the back and underside of the Laminate Top onto the Endsplash as it is held in place. Once the Endsplash is marked, cut it to fit. 7.4 Apply a bead of caulking to the Endsplash where it will contact the end of the Laminate top. 121 7.5 Install the Endsplash to the Laminate Top with #7 x 1-5/8” screws through the predrilled holes. ©2017 PCS Professional Cabinet Solutions. All Rights Reserved. Section 1: IMS 121 11