Field Installation and Service Manual IMS121 | Page 11

7.3 Prefit the Endsplash to confirm
it is the correct length for the scribed
Laminate Top end.
It must be flush to the front of the top
and flush to the top of the backsplash.
It must also be cut flush on it’s bottom
edge to the underside of the laminate
top and will not interfere with the top of
the cabinet. (See 7.1)
Flush
Trace the back and underside of the
Laminate Top onto the Endsplash as it
is held in place. Once the Endsplash is
marked, cut it to fit.
7.4
Apply a bead
of caulking to
the Endsplash
where it will
contact the
end of the
Laminate top.
121
7.5
Install the
Endsplash to
the Laminate
Top with #7 x
1-5/8” screws
through the
predrilled
holes.
©2017 PCS Professional Cabinet Solutions. All Rights Reserved.
Section 1: IMS 121
11