Field Installation and Service Manual IMS112 | Page 4

3.2 Once the area to be cut is located, cover the area with masking tape. This will protect the fi nish and help make your marks more visible on dark colors. Begin marking the layout with the back perimeter of the cutout. It should be 2” in from the back where the cabinet meets the wall. If the cutout is on an island where cabinet overall depths are greater than 24”, the location should be the same (2” in from the back of the cabinet the outlet is mounting to) unless the island end is to receive applied decorative panels, or any other specifi c instruction. In this case, follow the direction given in the plans for specifi c outlet placement. ©2017 PCS Professional Cabinet Solutions. All Rights Reserved. Section 1: IMS 112 4