Field Installation and Service Manual IMS106 - Page 5

Step 3C - Rip Filler to Fit: Complex Wall Condition Wall is curved in two directions along the length of the area to be fi lled Scribing to a Complex Wall Condition Complex wall condition at filler space 2-3/4” 2-3/4” 2-11/16” 2-11/16” 12” 2-5/8” 2-5/8” 2-9/16” 2-9/16” Tall Cabinet 106 12” 3C.3 Complex Wall 2-1/2” 2-1/2” 2-9/16” 2-9/16” 2-5/8” 2-5/8” 2-11/16” 2-11/16” Set the table saw fence for the largest dimension, and carefully cut the fi ller along the line. See Section “3 Tapered”. Scribe material measured and marked at 12” increments to fit the reveal 3C.1 Complex Measure the wall space between the cabinet and the wall at 12” inter- vals from the top to bottom. Transfer the dimensions of the wall condition to the fi ller piece at the same 12” intervals. 3C.2 Complex Connect the marks with a continuous line. Use masking tape on the fi ller if the color is dark or a fi nished wood. ©2017 PCS Professional Cabinet Solutions. All Rights Reserved. Section 1: IMS 106 5