Field Installation and Service Manual IMS106 | Page 2

Field Installation and Service Manual
SECTION 1 - INSTALLATION
Installing
Cabinet Wall Fillers
Illustrated Method Sheet 106
Step 1
Select Filler and Confi rm Length
Wall Cabinet Filler Length
Base, Vanity and Tall Cabinet Filler Length
Scribe
material
must be the
exact length
of the the
cabinet
box face
height
Scribe
material
must be the
exact length
of the the
cabinet
box height
Toekick
The procedure in this
Illustrated Method
Shee t assumes that
the steps described in
the previous documents
have been completed.
1.1
Confi rm that the fi ller piece is the exact length of the cabinet box it is to be
mounted to and wide enough to span the area needed.
Cut to length if needed.
Except for Inside Corner
Fillers, Wall Fillers that
span the space between
a cabinet box and the
wall should be installed
after the cabinet boxes
are securely fastened to
the wall.
Step 2
Measure Space to be Filled
In most cases, this space
to be spanned is not
parallel. Proper
installation poses a
technical challenge for
the installer.
The techniques
discussed in this method
sheet will describe a
safe and effective
procedure for installing
these fi llers.
©2017 PCS Professional Cabinet Solutions. All Rights Reserved.
2.1
Measure
wall condi-
tion at 12”
intervals
where a
fi ller is to be
installed.
Section 1: IMS 106
2