Field Installation and Service Manual IMS105 | Page 9
Inside Corner Fillers for Tall Cabinets
x
x
x
x
Cabinet 1
x
x
A Tall Cabinet Inside Corner Filler
should be handled the same as
the Wall Cabinet version, omitting
the bottom fi ller.
The fi ller halves should be calcu-
lated, cut, fastened together and
installed onto the fi rst cabinet prior
to securing the second cabinet of
the corner.
x
x
x
x
Cabinet 1
x
Cabinet 2
x
x
x
x
x
x
x
x x
x x
105
x
x
x
x
Measure and cut the fi ller parts,
assemble them, attach the as-
sembled set to Cabinet 1 and then
install Cabinet 2 by shimming it
into place and securing it fi rst to
the fi ller and then to the wall.
x
x
x
x
Inside Corner Fillers for Base and Vanity Cabinets
Step 1
Calculate and Install the Filler Halves to Each Box
1.1
Base and Vanity Cabinets can
be handled in a slightly less involved
manner since the dead space behind the
inside corner is accessible during instal-
lation.
The fi ller halves can be installed individu-
ally to each cabinet box that makes up a
corner and then joined to each other as
the corner is being constructed.
This method allows for a bit more latitude
in tolerance for fi ller dimensions and
ease of installation.
Begin by calculating the fi ller dimensions
as with Wall Cabinets but installing them
directly to their corresponding cabinet.
©2017 PCS Professional Cabinet Solutions. All Rights Reserved.
Section 1: IMS 105
9