Appliance
Panel 5 / 8”
Appliance Panel 5 / 8”
* Filler 2-1 / 2” * Filler 2-3 / 4”
5.2 Once the Base Cabinet dimensions are marked accurately, choose a point in the base cabinet run where it is critical that a wall cabinet edge lines up directly above a base cabinet edge. On long or wall-to-wall runs, this point should be close to the middle.
Mark a plumb line through that point( See Plumb Line A) and use it as a starting point for marking the edges of the Wall Cabinets to either side of the plumb line. Label the Wall Cabinet locations as before.
Laying Out a Wall Cabinet Run and Marking Cabinet Locations
102
|
Wall Cabinet
Index Line
|
W391824 # 7
G. 39”
|
F. 5 / 8” |
W3336 # 8
E. 33”
A. Plumb
Line
|
W3018 # 9
B. 30”
Start Here
|
W3036 # 10
C. 30”
|
W1536 # 11 D. 15” |
* Wall Cabinet Depth 11-3 / 4” |
|
Base Cabinet
Index Line
|
Refer Space 39” |
B33 # 1 |
Oven Space 30-1 / 4” |
B33 # 2 |
* Base Cabinet Depth 23-3 / 4” |
Floor Highpoint
5.3 Once the cabinet edges are determined and the locations are marked with the appropriate cabinet, mark plumb lines at each vertical cabinet edge.
These lines do not have to be dark, but if marked accurately, they can help align cabinets while they are being installed and reduce the need of constantly checking level.
No need to mark a plumb line at the inside fi ller line, since the fi ller does not mount at the back wall. Continue this process for any adjacent walls.
Completing the Layout by Marking Cabinet Edge Locations with Plumb Lines
|
W391824 # 7 |
W3018 # 9 |
|
|
|
Wall Cabinet
Index Line
|
Refer Space 39” |
|
W3036 # 10 |
W1536 # 11 |
|
Base Cabinet
Index Line
|
B33 # 1 |
Oven Space 30-1 / 4” |
|
B33 # 2 |
|
|
Floor Highpoint |
|
© 2017 PCS Professional Cabinet Solutions. All Rights Reserved. Section 1: IMS 102 11