The Maniks Dust Collector Controllers of this sequence can be programmed to suit customer’s
actual necessities which are micro controller based units.
The two basic modes of operation are: a) Program Mode b) Manual Mode
1. Program mode: The unit can be programmed to follow desired set of instructions as
specified by client.
2. Manual Mode: We can process output (Pilot Valves) serially. This controller has been
intended to operate the pulse solenoid valves used on dust collector systems.
Sequential controller has been given with SEEPROM to hold programmed values of various
criterion in case when there is power failure. The current data gets automatically stored in
SEEPROM. This SEEPROM will store up to 1million read/write functions and the stored/existing
data will be saved up to many years.
Operation of Micro Controller Based Bag Filter Timer:
The Micro Controller Based Bag Filter Timer provides timed sequential energization of
connected loads. The Pilot valve will remain energized for the length of time as indicated by the
setting of the “ON “control, when power is applied to the controller.
MENU key pressed on keyboard for approx 3sec, we can select “PROGRAM MODE” for
modification in data of various specifications.
Supply Voltage Input Fuse
230VAC 300m A.
110VAC 300m A.
Coil Voltage: 230VAC / 110 VAC
Number of Channels: 8, 16, 32
On Time: 1m.Sec to 9999m.Sec.