B ] 1) Channels activated in sequence as per and‘ Off’ and‘ On’ time- Auto Mode. 2) Output channels are activated by pressing push button on PCB near Auto / Manual switch channel in sequence- Manual mode.
Specifications of Maniks Solid State Sequential Controller:
Supply Voltage
Input Fuse
230VAC
24VDC
1.5A 3A
110VAC
3A
• Pulse Frequency / Range Adjustability: Standard: 2 to 60 seconds
• Special Requirements: 1) 4 to 120 seconds 2) 6 to 180 seconds
• Pulse Duration / Range Adjustability: 20 to 200 milliseconds
• Special Requirements: 1) 40 to 400 milliseconds 2) 100 to 1000 milliseconds
• Number of Sequence Steps 2 through 10, adjustable in field( Factory set at 10) 2 through 18, adjustable in field( Factory set at 18) 2 through 40, adjustable in field( Factory set at 40)
• Operating Temperature Range: 00C to 500C
• Repetitive Accuracy on Time Sequence: ± 5 %
• Current Rating per Sequence Step: Voltage Max Inrush Current Constant Current
230 VAC 4 Amp.( 50 Hz.) 2 Amp.( 50 Hz.) 110 VAC 4 Amp.( 50 Hz.) 2 Amp.( 50 Hz.)
• Special Requirements for Voltages( DC Kit Type): Following variations can be given in channel 10 channel, 18, 40 Channel as well as with FEEDBACK Types.
( NOTE: Solid-state components require that minimum regular current per succession step must not be under 0.050 amperes. Consult Factory for extraordinary rating including operation below 0.050 amperes)
Micro Controller Based Bag Filter Timer: