Your Heating Specialist since 1949
SRL-ADJ Silicone Rubber Heating Blankets with Control
SRL-ADJ
Product Highlights
Built-in temperature control for plug-and-play operation
Exceptional durability and suitable for a large range of surfaces like tanks , hoppers , conveyors , silos , etc .
Easy-to-apply industrial strength pressure sensitive adhesive backing option
Patented grounded heating element meets NEC 427.23 Moisture , chemical , and radiation resistant
Heating element is laminated between two layers of 20mil fiberglass reinforced silicone rubber
Ordering Information :
Width in ( mm )
( see ordering options for details )
Specifications :
• Power Density : SRL Series : 2.50 W / in ² ( 0.39W / cm 2 ) for metal surfaces * SRP Series : 1.25 W / in ² ( 0.19 W / cm 2 ) for plastics surfaces
• Adjustable Thermostat Options : SRL Series : Up to 425 ° F ( 218 ° C ) † SRP Series : Up to 160 ° F ( 71 ° C ) †
• Voltage Options : 120VAC or 240VAC single phase
• Exposure Temperature : -60 ° F to 450 ° F (-51 ° C to 232 ° C )
• Dielectric Strength : Over 2000 volts
• Silicone Rubber Density : 46.0 oz / yd ² ( 1560 g / m ²)
• Power Cord 6 ft ( 1.8 m ) long 120VAC with standard 3-prong plug ( NEMA 5-15 ) 240VAC with standard 3-prong plug ( NEMA 6-15 )
• Ingress Protection Rating : IP54
Size
Length in ( mm )
SRL : 2.5 W / in ² ( 0.4 W / cm ²)
Total Watts
SRP : 1.25 W / in ² ( 0.2 W / cm ²)
6 ( 152 ) 12 ( 305 ) 180 90 6 ( 152 ) 24 ( 610 ) 360 180 6 ( 152 ) 36 ( 914 ) 540 270 12 ( 305 ) 12 ( 305 ) 360 180 12 ( 305 ) 24 ( 610 ) 720 360 12 ( 305 ) 36 ( 914 ) 1080 540 18 ( 457 ) 18 ( 457 ) 810 405 18 ( 457 ) 36 ( 914 ) 1472 ( 1 ) 810 24 ( 610 ) 24 ( 610 ) 1440 720
Part Number Matrix
Product Series SRL - ( 2.5 W / in 2 ), SRP - ( 1.25 W / in 2 )
Width ( inches ) Length ( inches )
Voltage 1 - ( 120V ), 2 - ( 240V )
Pressure Sensitive Adhesive P - ( with PSA ), Blank - ( without PSA )
• Tanks
• Vessels
• Hoppers
• Silos
Ideal For
SRL 06 12 1 P ADJB
Ordering Options ADJB - With Plug ADJ - No Plug , Ferrule Crimped Wire Terminations ( CSA Approved )
• Conveyors
• Vats
*
Consult factory if SRL series will be used on a plastic surface .
† If precise temperature control is required for your application , please contact BriskHeat or your local distributor for application assistance and product solutions .
• Any Large Surface
H E A T I N G BLANKETS
24 ( 610 ) 36 ( 914 ) N / A 1080
( 1 )
2.27 W / in 2 ( 0.35 W / cm 2 )
Custom Sizes and Designs Available : Contact your local distributor or BriskHeat ® for more information .
Toll Free : 800-848-7673 Phone : 614-294-3376 w w w . BriskHeat . c o m Email : bhtsales1 @ briskheat . com Fax : 614-294-3807 © BriskHeat Corporation . All Rights Reserved . 19-10
51