SRL / SRP
SRL and SRP Silicone Rubber Heating Blankets
Your Heating Specialist since 1949
Product Highlights
Exceptional durability and suitable for a large range of surfaces like tanks , hoppers , conveyors , silos , etc .
Easy-to-apply industrial strength pressure sensitive adhesive backing option
Temperatures up to
450 ° F ( 232 ° C )
Patented grounded heating element meets NEC 427.23 Moisture , chemical , and radiation resistant
Heating element is laminated between two layers of 20mil fiberglass reinforced silicone rubber
Optional high-limit safety thermostat to protect heater and contents being heated
up to 392˚F ( 200˚C )
Fiberglass reinforced silicone rubber
H E A T I N G BLANKETS
Specifications :
• Power Density : SRL series : 2.50 W / in 2 ( 0.4 W / cm 2 ) for metal surfaces * SRP series : 1.25 W / in 2 ( 0.4 W / cm 2 ) for plastic surfaces
• Voltage Options : 120VAC to 600VAC single phase
• Exposure Temperature : -60 ° F to 450 ° F (-51 ° C to 232 ° C )
• Dielectric Strength : Over 2000 volts
• Silicone Rubber Density : 46 oz / yd 2 ( 1560 g / m 2 )
• Power Cord : 48 ” ( 1219mm ) high temperature silicone cord
• Ingress Protection Rating : IP56
* Consult factory if SRL series will be used on a plastic surface .
Ordering Information :
Standard Sizes and Wattages
Width in ( mm )
Size
Length in ( mm )
SRL Series : 2.5 watts / in 2 ( 0.4 W / cm ²)
Total Watts
SRP Series : 1.25 watts / in 2 ( 0.2 W / cm ²)
6 ( 152 ) |
12 ( 305 ) |
180 |
90 |
6 ( 152 ) |
24 ( 610 ) |
360 |
180 |
6 ( 152 ) |
36 ( 914 ) |
540 |
270 |
12 ( 305 ) |
12 ( 305 ) |
360 |
180 |
12 ( 305 ) |
24 ( 610 ) |
720 |
360 |
12 ( 305 ) |
36 ( 914 ) |
1080 |
540 |
18 ( 457 ) |
18 ( 457 ) |
810 |
405 |
18 ( 457 ) |
36 ( 914 ) |
1620 |
810 |
24 ( 610 ) |
24 ( 610 ) |
1440 |
720 |
24 ( 610 ) |
36 ( 914 ) |
2160 |
1080 |
Note : Plug not included |
3 / 16 ” ( 4.8 mm )
Grounded heating element
About High-Limit Safety Thermostat :
BriskHeat ® offers an optional high-limit safety thermostat to protect both the heater and the product being heated from damage if the main controlling device fails .
Part Number Matrix SRL 06 12 1 P H150 -096
Product Series SRL- ( 2.5 W / in ²), SRP- ( 1.25 W / in ²)
Width ( inches ) Length ( inches ) Voltage , 1- ( 120 ), 2- ( 240 ), 3- ( 277 ), 4- ( 480 ), 5- ( 208 ), 6- ( 600 )
Pressure Sensitive Adhesive Option P- ( with ), blank- ( without )
High-Limit Safety Thermostat Option H150- ( 150 ° F / 66 ° C ) [ recommended for plastic surfaces ] H450- ( 450 ° F / 232 ° C ) blank- no high-limit
Lead Length Adjustment Option Additional lead lengths in 6 inch increments example : 096- ( 96 in ), blank- ( standard 48 in )
IMPORTANT : Temperature controller is required for this product . See pages 86 through 104 for options . Custom Sizes and Designs Available : Contact your local distributor or BriskHeat ® for more information .
50
Toll Free : 800-848-7673 Phone : 614-294-3376 w w w . BriskHeat . c o m Email : bhtsales1 @ briskheat . com Fax : 614-294-3807 © BriskHeat Corporation . All Rights Reserved . 19-10