Care and Maintenance
GB
REMOVAL OF THE BURNER COVER PLATE:
The burner cover plate is secured at the front by two
tabsinserted in two slots; to removethe cover plate,
raise the rear ofthe plate so that it pivots at thefront and
withdraw the tabs form the slots.
REMOVING THE OVEN DOOR
The oven door can be removed quickly and easily. To
do so, proceed as follows:
• Open the door fully.
• Lift the two levers shown in fig.
REPLACING THE OVEN LIGHT
IMPORTANT:
The oven light must have these precise features:
a) it must be able to resist high temperatures (up to
300°C)
b) power supply: see V/Hz indicated on data plate.
c) power 25W.
d) E 14 connection.
• Close the door as far as the first stop (caused by the
raised levers).
• Lift the door upwards andoutwards to remove it
fromits mountings.
Before proceeding, disconnect the appliance from
the main electricity supply.
• to prevent damage, place a tea cloth in the oven
• nscrew the glass cover of the light
• unscrew the old light bulb and replace it with the
new one
• put back the glass cover and remove the tea cloth
• connect the appliance to the main electricity supply
To replace fit the door, fit the hinges in their mounting
sand lower the two levers.
RESPECT FOR THE ENVIRONMENT
The documentation provided with this oven has been
printed on chlorine free bleached paper or recycled
paper to show respect for the environment.
The packaging has also been designed to avoid
environmental impact. Pack-aging material is ecological
and can be reused or recycled. By recycling the
packaging, you will help save raw materials as well as
reducing the bulk of domestic and industrial waste.
12