Aldi SDA Manuals | Page 10

Alternatively, the soup making function can be used to loosen any stubborn stains. Add 800ml of water and a small amount of detergent and fit the lid. Press the soup-making button to start the programme to clean the jug. You can stop the cleaning process at any time by switching off the appliance. Rinse the jug thoroughly after cleaning and allow to dry before re-assembly. Troubleshooting Symptom Solution The unit is not working and beeping 1. The jug is not fitted to the base correctly. 2. The lid is not fitted correctly. 3. There is not enough liquid in the jug. 4. There are some spills around the over-flow sensor. 1. The lid is loose. 2. Liquid level is too low due to evaporation during cooking. 3. Liquid level is more than the maximum. 4. The jug is not correctly mounted on the base. 1. Pieces were possibly too large initially-use the blend function after the cooking programme to reduce. 2. The wrong function was selected. 3. Not enough water added - add in sufficient water. 1. Chop the ingredients into smaller pieces before adding. 2. The wrong soup cycle has been used for the volume added. 3. Too much water or food, filter is clogged. 4. Some food requires a longer cooking period: select the REHEAT function till food is fully cooked. There was too much hot liquid in the jugmovement of the soup during cooking tripped the upper overflow sensor. The unit has stopped in mid-programme (during the operation) Ingredients pieces are still too large after cooking is completed (food is not blended well enough). The ingredients are hard after the cooking cycle.(food cooked not well) The soup is not hot and the cooking cycle appeared to finish early. Food is burnt, and stuck to the bottom 1. Caused by high sugar, starch: Do not add excessive amounts of sugar to your ingredients. Avoid including large amounts of ingredients that contain high starch levels 2. Too much food and/or too little liquid. Helpline No. UK/Northern Ireland 0800-1488647 Rep. Ireland 1-800-932677 Web Support www.europasonic.com SPECIFICATION Model Number: SDA60 10