Quick Assembly
To start, remove the individual parts from the box.
Place the tailplane in the rear opening as shown in the
instruction manual, at the same time securing the elevator pushrod to the control horn, then secure the
tailplane with a single screw as supplied. Next take the
main wing and 'snap' into place underneath the wing
the two pre-formed wire undercarriage legs. As these
have the wheels already in place, this task takes less
than a minute. The nose wheel is already fitted ex factory. The cabin upper section is removable to access
the battery and internal wiring with the canopy held in
place by the very clever fake radio aerial, simply push
down on the aerial and the cabin pops up ready to be
removed, too easy! The main wing is held on with a
couple of supplied screws and the whole model can
remain fully assembled due its compact size and easy
internal access via the large removable canopy.
Airborne
75