African Mining October 2026 | Page 37

SAFE BLASTING DESPITE HOT HOLES, REACTIVE GROUND
CRADLE TO GRAVE •
All images supplied by BME

SAFE BLASTING DESPITE HOT HOLES, REACTIVE GROUND

Identifying reactive ground conditions is critical for selecting compatible explosives and maintaining safe, reliable blasting operations.
Helping mining companies improve safety and blasting performance as they face more challenging ground conditions. As mines become deeper and more complex, there is a growing need for practical solutions that reduce risks, protect workers and keep operations running safely and efficiently.
“ While these conditions have been encountered for decades, the scale and complexity of modern mining have elevated their significance,” said Nishen Hariparsad, general manager of Technology and Marketing at BME, during a recent company webinar titled Managing Hot Holes and Reactive Ground in Mining Operations.
“ Successfully managing these risks requires scientific expertise, disciplined operational practices and a proactive approach to risk management.”
Different solutions for distinct hazards Hennie van Niekerk, Regional Technical Services manager at BME, explained that hot holes and reactive ground are distinct hazards that require different management strategies.
“ Hot holes are primarily thermal hazards, while reactive ground is a chemical hazard involving reactions between ammonium nitratebased explosives and reactive minerals,” he explained.“ Although elevated temperatures may accelerate these reactions, each hazard requires its own controls.”
Hot holes are particularly prevalent in coal mining regions, where underground coal seam fires generate elevated ground temperatures, gas emissions and, in some cases, open flames.“ Heat may reach blast holes through conduction, convection, radiation and geothermal gradients, depending on site conditions,” he said.
Reactive ground, meanwhile, develops when sulphide-bearing rock chemically interacts with ammonium nitrate-based explosives. He said that this creates the potential for heat generation, decomposition and, in extreme cases, premature detonation.
“ Reactive ground often develops without obvious warning signs, which is why it is frequently referred to as the industry’ s‘ silent killer’,” he said.
He explained that reactive ground develops when sulphide-bearing rock chemically interacts with ammonium nitrate-based explosives. He said that this creates the potential for heat generation, decomposition and, in extreme cases, premature detonation.
He added that oxidation rates can double with every 10 ° C increase in temperature, creating the potential for thermal runaway where heat generation exceeds the rock mass’ ability to dissipate energy.“ Once oxidation reactions become established, temperatures can escalate rapidly, making early identification and control essential,” he said.
While reactive ground is commonly associated with coal mining and spontaneous combustion, he noted that similar risks also occur in PGM, base-metal and other metalliferous operations.
He said that BME classifies reactive ground into sulphide, acidic and alkaline categories, each capable of reacting with nitrates, destabilising explosive products and affecting detonation performance.“ Understanding these geological conditions forms the foundation of selecting appropriate explosive products and control measures,” he said.
Hot holes are primarily thermal hazards, while reactive ground is a chemical hazard involving reactions between ammonium nitrate-based explosives and reactive minerals.
Integrated approach to risk management Krause said that managing these hazards requires a holistic approach.“ Every element within a blast hole, bench or mining block must be evaluated against prevailing ground conditions,” he said.“ It is very important to understand both the chemistry and the technical aspects of how our products are applied in a particular operation.” Accurate sampling and testing underpin effective reactive ground management.
“ Delays in testing may allow oxidation to alter samples and reduce their ability to accurately represent in-situ conditions,” he said.“ Significant emphasis is, thus, placed on sampling protocols and testing frequency.”
Testing determines the degree of reactivity, establishes inhibitor requirements and validates safe explosive sleep times under sitespecific conditions.“ Laboratory testing may qualify safety windows allowable for operating at periods significantly longer than intended operational sleep times, providing an additional margin of safety before products are deployed in the field,” he said.
Victor Krause, Reactive Ground specialist at BME, noted that visible heat is not always a reliable indicator of risk.“ Some of the most severe reactions occur in blast holes showing little or no evidence of elevated temperatures before charging,” he said.
Where reactive ground is identified, inhibited explosive formulations can provide an additional layer of protection by suppressing chemical reactions between ammonium nitrate and reactive minerals.
www. africanmining. co. za African Mining Publication African Mining African Mining • October 2026 • 35