• OPERATIONS
EXPERT ANSWERS TO CONVEYOR BELT CLEANING PROBLEMS
By Dave Mueller, Product manager, Conveyor Products at Martin Engineering
Belt conveyor operators in high-volume bulk handling industries often discuss the efficiency“ sweet spot," which refers to the balance between the amount of spillage beneath the system and dust emissions above, relative to the volume of material being transported and the total uptime. This balance is a myth. There is no trade-off between maintaining a clean operation and ensuring productivity. In fact, installing the correct material discharge and belt cleaning configuration can effectively address both concerns, along with a variety of other issues throughout the entire conveyor system. 1
The quality and construction of belt cleaners are crucial for achieving optimal results. Two cleaners from different manufacturers, both made of polyurethane, may appear quite similar, but once installed and tensioned, operators will notice significant differences. Typically, a lower-quality cleaner( 1) allows more material to carryback,( 2) requires more maintenance labour,( 3) needs to be replaced more frequently,( 4) may not be suitable for the application ' s volume or properties, and( 5) could damage the belt, which is commonly the most expensive component of any conveyor system.
This article will discuss the various issues caused by inadequate belt cleaning: carryback, dust, equipment fouling, belt misalignment, maintenance labour and safety.
Eliminating carryback improves efficiency Carryback refers to material that is not discharged, bypasses cleaners and remains adhered to the conveyor belt beyond the head pulley. In addition to the loading zone, the discharge zone is often a main area where fugitive material accumulates beneath the conveyor system as“ spillage.” This is caused by carryback. After passing through the cleaner( s), material drops at the snub pulley and / or the take-up pulley. It typically does not all come off at once. As the stuck material travels along the belt return toward the tail pulley, it falls off along the belt path, disrupted by return rollers. Thus, cleaning the belt of as much carryback as possible is essential for workplace cleanliness and safety.
Invasive dust emissions Dust from the return belt can be pervasive. Once the belt is loaded, the pressure of the cargo and the vibration of the belt compress dust into the trough of the belt, packing fine particles into the divots and cracks. The older the belt, the more imperfections it has. As the belt passes through the cleaners – especially the secondary and tertiary ones – unless the cleaners are properly tensioned, the fines can settle in the blemishes and dislodge along the belt path. This creates clouds of dust along the way, and the tiny, gritty particles can infiltrate the smallest spaces, leading to equipment fouling.
Costly equipment fouling Carryback and dust are not only violations of workplace safety but also lead to costly consequences throughout the entire system. This results in reduced equipment lifespan and expensive replacements, which sometimes require unscheduled downtime.
• Belting – Carryback material accumulating at the discharge zone can encapsulate the tail pulley, rollers and belt. In this situation, the belt( typically the most costly component of any conveyor) will rest on the abrasive material and erode, reducing the equipment’ s lifespan.
• Pulleys and motors – Often, the head pulley acts as the drive pulley, meaning any fugitive dust from the discharge gets drawn into the air intake, clogs the working parts, and leads to a breakdown.
• Rollers – Fine particulates can foul bearings and cause the rollers to seize over time, leading to roller wear, belt damage, and frictional heat. Heat, combined with combustible dust and oxygen, equals a potential disaster. Furthermore, roller faces can become fouled with caked material, resulting in mistracking.
All images supplied by Martin Engineering
Sticky carryback can cake onto a roller, rendering it ineffective and costly to service or replace.
Mistracking away from efficiency Many conveyors come with a“ tracking” system that is intended( ineffectively in many cases) to keep the belt from encountering the stringer and shredding the edges. Some operators who experience mistracking on the return install a“ crown” roller design, which is thicker in the middle. If the belt drifts slightly, this design uses its weight to realign it back to the centre. When these return rollers are fouled by carryback, they no longer realign the belt. If the belt is not centred on the tail pulley, the cargo is likely to be loaded off-centre. This can result in the belt drifting further off centre, spilling cargo from a full belt and potentially damaging the entire system.
26 • African Mining • July 2026 www. africanmining. co. za