J221 OVERLAY EXTENDS LIFE OF WARMAN PUMP SHAFT SLEEVES AT MOGALAKWENA
PLANT AND EQUIPMENT •
he says.“ This then has further positive impacts the ratings required for motors, transformers, E-houses and power supply.”
The head and the tail of an RRC remain the same as in traditional systems, he explains, with the rail-running section making up the bulk of the distance. The basic mode of transport is steel-wheel-on-steel-rail instead of a belt running over idlers. This fundamental difference is what cuts energy consumption so drastically.
The system uses small carriages to carry the belt and these are automatically exchanged at maintenance houses when required. This removes the safety risks associated with personnel changing out idlers out along the length of the conveyor. Having fewer transfer points also has a safety benefit as these can be sources of injury during maintenance as well as health threats from dust exposure.
“ The RRC system has been a decade in development, drawing heavily on two established technologies,” he says.“ These are underground mining rail technology on the one hand and overland conveyor systems on the other.”
Lurie explains that the University of Newcastle’ s Dr. Craig Wheeler and colleagues obtained patents on the family of designs and FLS has an exclusive license with the University to exploit similar technology that FLS had also been developing.
The FLS / University of Newcastle team believe that the RRC innovation is a paradigm shift for conveyor systems- not only in terms of energy saving and carbon footprint reduction but also in terms of the distance that a conveyor can travel and the challenging terrain through which it can operate. Thanks largely to the way the belt sits stationary in the cradle, an RRC can negotiate tighter curves and can also climb steeper angles without the material on the belt rolling back and spilling.
“ Our straightforward calculations of the potential impact on existing mining operations shows unprecedented savings resulting from this system,” he says.“ One study, for instance, investigated the benefits for a customer who has to move material over 15km between the pit and the plant. Where seven conveyors were currently required we could do the same job with three – while consuming only a quarter of the energy.”
Lurie adds that the customer’ s comparisons to other high efficiency bulk haulage modes available to the mining industry reveal unmatched efficiency ranging from pit to plant, across the plant and onwards for the next 50 or 100km, if needed.
Source: Supplied by FLS
J221 OVERLAY EXTENDS LIFE OF WARMAN PUMP SHAFT SLEEVES AT MOGALAKWENA
When Anglo American Platinum’ s Mogalakwena mine in South Africa’ s Limpopo province wanted to extend the wear life of shaft sleeves in its Warman ® pumps, Weir suggested the application of the J221 premium wear-resistant overlay hardened shaft sleeve.
Testing was conducted on a Warman ® MCR ® 450 slurry pump at the North Concentrator to improve sleeve and packing wear life under conditions of contaminated or sub-optimal flush water. The J221 shaft sleeve’ s trial performance was exceptional, lasting 14 240 hours under conditions of both regular operations and extensive pump sliming. This was an almost 10- fold improvement on the standard shaft sleeve. The solution has led to savings in both downtime and spare parts.
www. africanmining. co. za African Mining • July 2025 • 35