African Mining July 2025 | Page 36

AFRICA IS EARLY ADOPTER OF RAIL-RUNNING CONVEYORS FROM FLS
• PLANT AND EQUIPMENT
Supplied by FLS
AFRICA IS EARLY ADOPTER OF RAIL-RUNNING CONVEYORS FROM FLS
Designed to dramatically reduce energy consumption, improve safety and cut capital and operating expenditure, Rail-Running Conveyors are a gamechanger for mines.
An African mine will be among the first adopters of the innovative Rail-Running Conveyor( RRC) technology, commercialised by full flowsheet provider FLS in collaboration with the University of Newcastle, Australia
“ Designed to dramatically reduce energy consumption, improve safety and cut capital and operating expenditure, Rail-Running Conveyors are a gamechanger for mines which must rely on extended conveying distances to move material,” says Martin Lurie, FLS Global Product Line manager for Rail-Running Conveyors( RRC). Any mine that carries substantial tonnages over more than 500 to 1 000m can achieve far higher efficiencies using this technology.
“ The first full-scale operational system will be commissioned in southern Africa in mid-2025,” he says.“ It is designed to carry 5 000mtph of copper ore over a 3.25km run, and is expected to save approximately USD1-million each year in power costs when compared to a conventional trough conveyor.”
A second system, destined for the same mining customer at a mine in the Americas, has also been under construction and will carry around 13 000mtph, also delivering significant power savings and safety improvements. Lurie describes the customer as visionary in looking ahead to the technologies that will empower the future of mining, and also as an indispensable partner in bringing the RRC to full-scale maturity.
Lurie highlights that the energy losses incurred by an RRC is anything between one-fifth to one-tenth of those experienced by traditional trough and pipe conveyor systems respectively.“ The friction losses on a conventional long distance conveyor,” he points out,“ largely determine the power capacity that must be installed, the size of the structures required and the downtime incurred to maintain and replace pulleys and drives. Reducing these energy losses therefore has a positive knock-on effect on the costs of a range of other aspects.”
“ Customers achieve savings on the scope of the conveyor equipment itself, the cut-and-fill civils requirements, the volumes of concrete used, the strength of the belt and the number of drive stations necessary,” he says. Due to the lower tension acting on the conveyor belt, a lower rating of belt is possible. Faster speeds and a deeper trough also mean that a narrower belt may suffice for the same throughput. Importantly, the rating of the drives does not need to be as high.
“ Where a 6MW drive may be specified for a conventional conveyor, for instance, this technology may allow a 2MW drive to be installed,”
34 • African Mining • July 2025 www. africanmining. co. za